Super B Professional chain cleaner

For optimum performance, we recommend using a chain cleaner with sprocket brushes, cleaning brushes and a chain degreaser during the chain cleaning process.
The sprocket brushes, cleaning brushes and degreaser shown in the photos are not included in the packaging.
Instructions:
1. Cover the work area with newspapers or rags to absorb any excess cleaning agent and dirt that may drip off the chain during cleaning.
2. Mount the bike on a workshop stand so that the crankset can rotate freely.
Move the chain onto the small freewheel and adjust the bike so that the lower part of the chain is parallel to the ground.
3. Brush excess mud, dirt and grime from the chain and freewheel using a sprocket brush and cleaning brush.
4. Assemble the handle onto the chain cleaner body.
5. Swing the locking clip to remove the cover upwards, position the chain cleaner on the lower part of the chain, halfway between the sprocket set and the crank set.
6. Replace the cover, then rotate the locking clip. An audible "CLICK" indicates that the locking clip is secured.
7. Add degreaser up to the "FILL" line on the lower housing side. Do not overfill to avoid spillage.
8. Holding the chain cleaner handle firmly with one hand, slowly turn the crank/pedal counter-clockwise for several full tours cycles until the entire chain has completed 2 or 3 cycles. Refill the tank with clean cleaning fluid and repeat the process if necessary.
9. Remove the chain cleaner and carefully dry the chain with a cloth to remove all cleaning fluid. Re-lubricate the chain.
10. Rinse chain cleaner with water and dry in the shade before storing.