BMX Parts Black Friday: discounts on grips, forks

Race, freestyle or young rider: where to start?

• In race, everything happens on the track: the BMX handlebars from Black Friday have the compulsory race number plate, the race forks made of carbon or aluminium seek to be lightweight, and clipless pedals are allowed from the U15 category onwards.
• In freestyle, the parts handle the landings: chromoly forks, pegs screwed onto the axles to slide on ledges and coping, grips without flanges for tricks where the handlebars rotate.
• For a young rider, stems and Mini or Junior seats bring the cockpit to the right size.

Measurements to check before buying

• Handlebars and stem: the handlebar clamp, 22.2 mm on most BMX bikes, 31.8 mm on some race handlebars, should match the stem. In race, the federal regulations limit the handlebar width to 73.7 cm and its height to 30.5 cm.
• Fork: the steerer, straight in 1 inch 1/8 or tapered, 10 or 20 mm axle and wheel size, 20 or 24 inches.
• Seat and post: the Pivotal mount, the most common in BMX, requires a seat post of the same system; also note the diameter of the post in place.
• Pedals: the 9/16 inch tread fits three-piece cranks, while the 1/2 inch thread fits one-piece cranks.

Comparing two discounts on the same part

In BMX, a promotion displayed under a model name does not always specify which version it is: Mini/Junior stem or Pro, different height handlebars for the same model, just the seat or a combo with its post, 20 or 24 inch forks. The product sheet also specifies the unit of sale: grips and pedals are sold by pair, pegs are sold individually or in pairs depending on the model, and a number plate does not always include letters and numbers. The crossed-out price only distinguishes between two offers once these points are identical, with anodized colour as a last consideration.

The other pages for your BMX

The permanent page for BMX components showcases these same categories throughout the year. During the event, the rest of the bike can be found in BMX transmission, wheels, and braking, rider gear in helmets, and all BMX sections on the BMX Black Friday page. For another bike, check out MTB components or all-purpose components; outside the event, look at clearance and new arrivals.

Frequently asked questions

Is a number plate required in BMX race?

Yes, the use of plates is mandatory in all competitions held under the regulations of the French Cycling Federation. The colour of the background and numbers depends on the rider's category, and your club will inform you of the required combination.

When to find BMX parts on sale for Black Friday?

The big moment is the Friday following Thanksgiving, but Vélo-Store's Black Friday discounts on BMX parts continue throughout November. Use this opportunity to take apart the part to be replaced and check its measurements: a handlebar or stem is chosen down to the millimetre.

Flat or clipless pedals on a BMX?

In freestyle, flat pedals with pins are the norm. In race, federal regulations only allow clipless pedals in competition from the U15 category, which means for riders aged 13 and older; toe clips and straps remain banned in all categories.

Pivotal or rails: which seat attachment?

The Pivotal clamps the seat with a single screw that goes through the base and locks a notched head post: compact and lightweight, it's the most common system in BMX. A rail seat requires a standard post; combos that combine seat and post simplify equipping small bikes.

Can MTB components fit on a BMX?

Some can, yes: flat pedals threaded in 9/16 inches, for example. The handlebars and stem, however, have different diameters, 22.2 mm on most BMX versus 31.8 or 35 mm on current MTBs, and an MTB fork does not match the wheel or geometry of a BMX.